Water damage and mold Restoration – What Is It?
It’s the process of repairing a house or property to its pre loss condition. Damage to the home could be because of an overflow, flood or any other water damage event. The water damage and mold restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. There are two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage and mold restoration. The S500 damage due to water guide may be the benchmark tool that is employed by companies that specialize in restoration of water damage.
Loss evaluation is the first and the most crucial step in water damage restoration. The assessment has to be correct to ensure that an appropriate response can be taken. In restorating the damage caused by water, technicians and the insurance companies must come together and understand what is damaged and how to go about restoring the damage. Identifying the origin of the damage, documentation of damage, and accurate estimates are mandatory for a proper emergency water damage restoration. Categorization is based on the contamination quantities of the water source. The categories are listed below
Category 1 – This is water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This really is water that has some contaminants like water from a dishwasher, washing machine or toilet with urine.
Category 3 – This is water that’s highly unsanitary and is capable of causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.
Decontamination and Drying
After the evaluation is complete, the process of drying and decontaminating begins at the site. Based on the extent of damage, damage caused due to water can be classified into 4 types. Class 1 Damage- When loss is restricted to a small area and less water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – When the damage is to the entire room and carpet area. Class 3 Damage – When the entire area is saturated with water and Class 4 Damage – when there are many deep saturation pockets. Decontamination and drying is a vital stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments have to be used. Decontamination has to be done if contamination has been detected in the area. Decontamination might be done for the entire area or in specific pockets where contamination has been detected especially houston free roof inspection.